While on-site at WEARC Field Day 2024, please take advantage of the temporary remote input for the NE2S repeater in Livingston, NJ which will be available throughout Field Day weekend. Using the remote input frequency will allow your signal to be full quieting into the repeater while using a HT on low power from our Field Day site. We will use this repeater to create awareness of our Field Day location and offer talk-in directions and site availability details (hours of operation) upon request.
Note: there is a small timing delay as a result of VoIP buffers for EchoLink and the end-to-end IP network path; pausing 1/2 second to begin your transmission after hearing the repeater courtesy tone is sufficient to compensate for this delay.
Standard Repeater Output: 146.595; Standard Repeater Input: 147.595 (+1.00 MHz), 127.3 Hz PL
Remote Input: 147.445 (+0.85 MHz), 127.3 Hz PL. Please set your HT to its lowest TX power setting.
Leave a Reply